How to Fix Srttrail.txt BSOD Error in Windows 11

SrtTrail.txt BSOD error means Startup Repair Trail Blue Screen of Death error. It can also be known as the MACHINE_CHECK_EXCEPTION BSOD error. The Srttrail.txt BSOD error in Windows 11 can be a real headache. If your screen looks like a blue screen that pops up and says your computer has a big problem and needs to restart, it means your system has this SrtTrail.txt BSOD error.

Microsoft’s Windows 11 operating system already contains an automatic repair tool that helps to resolve all start-up issues. Errors also occur because of messed-up system files, problems in hardware, or drivers that do not get along with your computer. These error issues take a lot of your time to fix. So, we will show you how to fix this SrtTrail.txt BSOD error in the following ways.

Srttrail.txt Error

The Srttrail.txt error in Windows 11 occurs errors due to problems with the System Restore feature or issues with system files. Here are some common causes of the Srttrail.txt error:

• A corrupted program is installed.
• Malware or virus.
• Hardware issues.
• A damaged or messed-up Windows Boot Manager file.
• Issues with the system power supply.
• Incomplete or Damaged file installation.

Initial Steps to Fix Srttrail.txt BSOD Error in Windows 11

Srttrail.txt BSOD Error in Windows 11, you can fix these errors by following these steps:

• Clear your PC from bugs and temporary issues by rebooting your PC.
• All external devices are disconnected.
• Check that your PC is properly connected to your hard disk and RAM.

How to Fix the srttrail.txt BSOD error on Windows 11 by following the ways

To identify corrupt system files in your system, the SFC (System File Checker) is used to scan files only. The Check Disk scans your drive for corruption and bad sectors and effectively eliminates both. Follow the below steps on how to scan the SFC and disk:

1. Choose “Command Prompt” from the options in the Advanced Settings.
2. Then, type or copy and paste this command and press Enter.
3. After that scan, run another tool by typing this ‘chkdsk /r c:‘.
4. Done both steps, restart your computer.

Verify Device Partition

Verifying your device partition by following these steps:

1. Open the Advanced Options window.
2. Choose Command Prompt from the options.
3. Copy and paste the command “bcdedit” and press Enter.
4. Check if it says “partition=C:” next to “device” and “osdevice.”
5. If it does not work, enter these commands one at a time:
   • “bcdedit /set {default} device partition=c:”
   • “bcdedit /set {default} osdevice partition=c:”
6. Restart your computer.

Repair the MBR (Master Boot Record)

You can repair the srttrail.txt BSOD error on Windows 11 by fixing the Master Boot Record using these steps:

1. Open the Command Prompt window from the Advanced options.
2. Copy and paste the command “bootrec.exe /rebuildbcd” and press Enter.
3. Then, run this command “bootrec.exe /fixmbr“.
4. Finally, type or paste this command “bootrec.exe /fixboot” and press Enter.
5. After completing these steps, restart your computer and see if the srttrail.txt error in Windows 11 is resolved.

Disable Automatic Startup Repair

You can stop automatic startup repair and check if the issue is fixed. Here is how:

1. Turn on your computer by pressing the power button.
2. Just before the computer starts up, press and hold the power button to turn it off. Do it three times.
3. On the fourth attempt, the automatic repair will start.
4. Wait for the automatic repair to finish. A pair of options are available. These include “Shut Down” and “Advanced Options.”
5. Choose “Advanced Options” from the menu.
6. Click on “Troubleshoot.”
7. Select “Advanced Options” from the options provided.
8. Now, click on “Command Prompt.”
9. In the Command Prompt, type in the following command and press Enter as shown below.
   • bcdedit /set {default} recoveryenabled No.
10. After running the command, restart your computer.

Check for Drive Error

You can also encounter this problem if there are issues with your computer’s storage drive. To check and fix any errors on your drive, follow these steps:

1. Open File Explorer on your Windows 11 PC by pressing the Windows key + E.
2. Right-click on your Windows installation drive, usually labeled as “Local Disk C,” and select “Properties.”
3. Navigate to the “Tools” tab in the Properties window.
4. In the “Error Checking” row, click the “Check” button.
5. Click on “Scan Drive” to start looking for errors on the drive.
6. If any errors are detected, the tool will allow you to repair them.
7. After the repair process is complete, click on “Show Details” to see the specific checks and repairs that were performed.

Check Your Computer’s RAM for issues.

You can solve errors by checking your RAM as follows:

1. Go to the Start Menu.
2. Type “Windows Memory Diagnostic” and press Enter.
3. Click on the result that says “Windows Memory Diagnostic” to open it.
4. Now, click “Restart now” and let your computer check for RAM problems.

Disconnect Your USB Devices

You can repair the srttrail.txt BSOD error on Windows 11 by disconnecting your USB devices and following these steps:

• Unplug Extra Devices like printers, USB cables, cameras, and things you do not need right now.
• Restart Your Computer to check if the error is gone. If the error message does not show on the screen, one of these devices or their drivers is causing the problem.
• Identify the Problem Device
• To find out which device is causing the trouble, reconnect them one by one and restart your computer each time. When you find the one that triggers the issue, you will need to update its driver.

Update the Driver

Try to update the driver for the problematic device. If that does not fix it, you will have to repair or replace that device.

Restart Your Computer Has a srttrail.txt Error

Restarting your computer will solve this error. Here are the steps:

• Restart your computer a few times while trying to fix the srttrail.txt error.
• Once the restarts stop, you will see a blue screen with boot options.
• Select “Troubleshoot” from the boot options to get to advanced boot options.
• Now, choose the “system restore” option on the current screen.
• If needed, enter the administrator’s username and password.
• You can click “Next” if you want to use the current restore point. Or, if you prefer a different restore point, click “Choose another restore point” and then click “Next.”
• Once you’ve selected the restore point, your computer will start restoring the system.

Scan Your Computer for Malware

If you suspect malware is causing the srttrail.txt error, running a full scan in Safe Mode is best. Here is how:

1. On the error screen, choose “Advanced options.”
2. Then, select “Startup settings.”
3. Click “Restart.”
4. To start in Safe Mode, press the number 4 key.
5. After your computer restarts in Safe Mode, go to the Start menu.
6. Type “Windows Security” and open it while in Safe Mode.
7. Choose “Scan options” in the left menu under the “Virus & Threat Protection” section.
8. Choose “Full Scan.” this will scan your computer thoroughly for malware.

Resetting Your PC

If nothing else works to fix your PC problem, try resetting it. Your personal files will not be lost, but all installed programs and settings will return to the default.

1. Enter Recovery mode and click ‘Troubleshoot.‘
2. Choose ‘Reset this PC.’
3. Decide to keep files or go back to factory settings.
4. Pick ‘Cloud download‘ or ‘Local reinstall‘ for Windows.
5. Choose which drives to remove files from.
6. Select ‘Just remove my files‘ or ‘Fully clean the drive.’
7. Click ‘Reset‘ to start.

What is the Srttrail.txt BSOD error in Windows 11?

The Srttrail.txt error is a Blue Screen of Death (BSOD) error that appears when Windows 11 encounters problems with the Startup Repair tool. It’s usually related to system file corruption or other issues.

Why am I seeing the Srttrail.txt BSOD error?

This error can occur for various reasons, including corrupted system files, problematic hardware, or software conflicts.

How do I check for hardware issues causing the Srttrail.txt error?

You can diagnose hardware by testing your RAM, hard drive, and other components. Some PC manufacturers provide built-in diagnostics tools that are accessible during startup.