Replacing the water filter in your refrigerator is crucial for clean and healthy water consumption. Whirlpool recommends changing their fridge water filters whenever the indicator turns its color or every six months at the latest.
With this simple guide, you can easily replace your Whirlpool water filter at home in just a few minutes without requiring technician support. We have also shared expert suggestions to help you determine when it’s time to change your water filter.
When should you change the water filter on the Whirlpool refrigerator?
Whirlpool advises customers to replace their refrigerator water filters every six months or even earlier if needed. Most modern refrigerators with water filters are equipped with an indicator that will signal when it’s time to change the filter.
However, there are some signs that you can look out for to know if it’s time to replace your Whirlpool refrigerator water filter immediately. Here are some indicators that tell you that your Whirlpool refrigerator water filter needs to be replaced:
- Carefully check the water’s taste: If the taste of the water is similar to tap water, it is necessary to replace the filter.
- Check the Ice taste: If the taste of the IC (ice) is bad, it could be a sign that the filters need to be replaced.
- Check the Smell of the Water & Ice: When you encounter unpleasant or unusual odors, it can also be a sign of something wrong or concerning.
- Check the Water Pressure: When the water pressure from the dispenser is low, it could indicate that the water filter is expired or nearing expiration.
- Check Waterfilter Indicator: Your refrigerator has a water filter indicator that alerts you through beeps or changes in color when it’s time to replace the filter.
How do you change the water filter on a Whirlpool refrigerator?
If you own a Whirlpool refrigerator, it’s important to know how to change the water filters. Fortunately, the process is easy and can be done quickly.
However, before installing a new filter, you must make sure it is an approved water filter for your Whirlpool® refrigerator. Please note that there are a total of four filters, and you must replace them one by one.
If you are not confident in your ability to change the filters, you can request support from Whirlpool. Here are the simple steps to replace the filters:
How to Replace Whirlpool Refrigerator Water Filter 1
If you’re looking for your water filter cover, you can find it in the upper right-hand corner of your fridge or in the base grille. To remove the filter, lift the filter door upwards and pull it out.
Be sure to dispose of the old filter properly. When installing your new filter, remove the protective coverings from the O-rings carefully. Make sure the O-rings stay in place after removing the cover.
To insert the new filter properly, ensure the arrow faces upward. Avoid forcing the filter into place. If it doesn’t slide in smoothly, turn it until the notches align with the grooves.
To replace the filter, firmly push the filter door until it snaps into place. After replacing the filter, flush the line with four gallons of water to ensure proper function. Finally, don’t forget to reset the filter light.
How to Replace Whirlpool Refrigerator Water Filter 2
Please check the top-right area of the refrigerator to find the closed water filter. To replace the filter, first open the filter door. Then, pull the filter downwards at an angle and turn it towards the left before removing it completely. Finally, dispose of the old filter.
To install the new filter, open the new filter and carefully remove the protective coverings from the O-rings. Verify that the O-rings remain in their proper position after the cover has been removed. When inserting the new filter into the filter slot, ensure that the arrow is pointing upwards.
As you start pushing it in, the filter will begin to rotate. To securely fasten the filter, rotate it in a clockwise direction until it clicks. Then, push the filter door shut until it firmly snaps into position.
After replacing the filter, we recommend flushing the line with four gallons of water to ensure proper functionality of the new filter.
How to Replace Whirlpool Refrigerator Water Filter 3
To access the water filter of your refrigerator, locate the cover on the left side of the base grille. To remove the filter, press the eject button first and then pull it out.
Properly dispose of the old filter. Open the new filter and carefully remove the protective coverings from the O-rings. Check that the O-rings are in place and have not been displaced.
To install the new cartridge, align the ridges on the filter cap and place it on top. Twist the cap in a clockwise direction until it locks firmly into place. When inserting the new filter, ensure that the arrow faces towards the left.
Firmly insert the new filter until the eject button pops out. After replacing the filter, flush the line with four gallons of water to ensure proper functioning.
How to Replace Whirlpool Refrigerator Water Filter 4
To locate the water filter cover of your refrigerator, kindly check the upper right-hand corner of the interior. If the filter tab is positioned outward, gently pull down on the cover to access the filter. However, if the tab is located at the bottom of the cover, pull the small lever forward and down to open it.
To replace the filter, rotate it towards the left and pull it out. Dispose of the old filter appropriately. If you are installing a new filter, inspect the filter slot for a cap. Rotate the cap counterclockwise to remove it. Properly insert the new filter by aligning it with the grooves in the slot, pushing it in, and turning it to the right.
To secure the filter, apply pressure upwards until it clicks into place. Then, push the filter door upwards until it snaps shut. After replacing the filter, it is recommended to flush the new filter by running four gallons of water through the line. This will ensure proper functioning of the filter.
How often should a Whirlpool refrigerator inform about changing its drinkable water filter?
Your refrigerator’s water purification system works hard to keep your drinking water clean and fresh. To keep it in good condition, it needs to be replaced regularly. We recommend replacing it at least once every six months.
How long is the average life span of a Whirlpool freshwater filter?
The indicator light on the Whirlpool water purification system should be checked every six months and replaced whenever it turns on.
What occurs if you consume the refrigerator’s water after updating the filter?
The activated carbon granules present in your filter media may become separated during production and transportation. Consequently, the first few bottles of water that you pour after installing a newly purchased refrigerator filter may contain carbon particles, causing the water to appear hazy and greyish.